PREPARING SPECIAL TOOL FOR USE
4
Preparing special tool for use
4.1
Transport
The special tool is supplied in a closed
wooden case.
The wooden case can be transported with a
forklift or suitable lifting gear.
4.2
Unpacking
1. Undo and remove the fixing screws of
the cover.
2. Undo and remove the fixing screws of
the parts screwed to the wooden case.
3. Remove all parts from the wooden
case.
4. Set the special tool down on a stable
work surface.
Fig. 5
At least two persons are required for unpacking the special
tool.
Fig. 6
30