Basic Safety Instructions; General Safety And Accident Prevention Instructions - walterscheid SW41 Bedienungsanleitung

3.4

Basic Safety Instructions

3.4.1

General safety and accident prevention instructions

Use of the special tool
SAFETY INSTRUCTIONS
Basic Safety Instructions:
always apply for the safe operation of the special tool,
•
are compiled in the following subchapters.
•
In addition to the safety instructions in this chapter, also
•
observe the generally applicable safety and accident
prevention regulations.
Always wear your personal protective equipment when
•
working on the special tool.
Observe the warning notices and instructions applied to
•
the special tool. In this way, you obtain important
information for the safe and faultless operation of the
special tool.
In addition to the basic safety instructions in this chapter,
•
also observe the action-related safety instructions of the
other chapters.
Send any people out of the close vicinity of the special tool
•
before you put it into operation. Pay particular attention to
children.
Before starting work, familiarise yourself with all the
•
equipment and control elements and their functions of the
special tool. During the work is too late for this.
Only put the special tool into operation when all safety
•
devices and protection equipment are installed.
It is prohibited for persons to be in the work / danger zone
•
of the special tool.
There are crushing and shearing points on moving parts of
•
the special tool which are operated by external force (e.g.
pneumatically).
You are only permitted to actuate parts of the special tool
•
operated by external force if there are no persons in the
danger zone of the special tool.
21