Overview - Assemblies - walterscheid SW41 Bedienungsanleitung

2.1 Overview – Assemblies
Fig. 1
(1) Special tool SW 41 for dismantling and
mounting of yokes and crosses
(2) Mounting plate with bore holes for
bolting firmly to a worktop
(3) Foot switch with compressed air
connection for external compressed air
system. The input air pressure of the
external compressed air system must
not be less than 6 bar and must not
exceed 10 bar.
PRODUCT DESCRIPTION
Illustration of the special tool SW 41 and designation of the
most important elements.
(4) Quick-change system for holding the
(5) Clamping bolt for locking the quick-
(6) Holders for storage of the unused drift
9
drift punch and the various mandrels for
the dismantling and mounting of the
yokes and crosses, can be pivoted
vertically and locked
change system in the required position
punch/mandrels