Transport, Storage, Maintenance And Disposal; Technical Data - Siko MS100/1 Originalmontageanleitung

MS100/1
20

Transport, Storage, Maintenance and Disposal

Mechanical data
Housing
Sensor/band reading dis-
tance
Cable sheath
• Magnetic sensor has not been aligned according to
7 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store the magnetic sensor with care. Pay attention
to the following points:
• Transport and / or store the magnetic sensor in the unopened origi-
nal packaging.
• Protect the magnetic sensor from harmful physical influences includ-
ing dust, heat and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the magnetic sensor for transport dam-
ages. Do not install damaged magnetic sensors.
Maintenance
With correct installation according to chapter
requires no maintenance. Clean the surface of the magnetic tape with soft
cloth from time to time if it is very dirty.
Disposal
The magnetic sensor's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the magnetic sensor must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.

8 Technical data

aluminum blue
aluminum uncoated, barrel-
finished
≤0.4 mm
PUR, PVC
MS100/1 · Date 27.04.2018 · Art. No. 82106 · Mod. status 118/18
Fig. 7.
4
the magnetic sensor
Additional information
L design
B-TR design
6-wire ø5.1 mm
-0.2
English