Identification; Installation; Mechanical Mounting - Siko MS100/1 Originalmontageanleitung

MS100/1

Identification

External magnetic fields
CAUTION
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g.
The magnetic tape is identifiable by a consecutive imprint.
e. g.

4 Installation

4.1 Mechanical mounting

Magnetic sensor failure
CAUTION
` When mounting pay attention to the IP type of protection (see chap-
` Do not open the sensor yourself.
` Avoid blows to the unit.
` Make any changes to the unit.
` The cable must be provided with strain relief. If necessary use drag
Loss of measured values
NOTICE
` The tolerances and distance dimensions must be observed over the
Exemplary sensor figures are valid for all sensor types unless described
NOTICE
separately.
MS100/1 · Date 27.04.2018 · Art. No. 82106 · Mod. status 118/18
-
MS100/1 0023
variant number
type of unit
MBxxxx GEK WT RP NNNNNN
ter 8.
chain or protective sleeve.
whole measurement length.
batch number
reference point
material carrier tape
accuracy
MB type
English 15