Using The Bluetooth Speaker - Silvercrest SBL 6 B2 Bedienungs- Und Sicherheitshinweise

Insert the micro-USB plug of the charging cable
12
into the micro-USB socket of the Bluetooth
®
8
speaker. Insert the USB plug of the charging
cable into the USB port on a PC or a USB adapter
(not included in scope of delivery).
Note: The signal LED
will light up red whilst
2
charging and goes out once charging is completed.
The charging time for a drained battery is approx.
4 hours.
Note: The speaker may be used whilst charging.
However, doing so will at a minimum double the
charging time.
Once charging is complete, remove the micro-USB
plug of the charging cable and close the protective
cover so the device is splash-proof again.

Using the Bluetooth speaker

Establishing a Bluetooth connection:
®
Remove all plugs from the AUX stereo jack
7
before you establish Bluetooth radio link.
®
Press and hold the until 3
Bluetooth button 3
second the signal LED flashes blue and a sig-
2
nal of sound sequence. The speaker will now at-
tempt to connect to the playback device (e.g.
smartphone or computer).
Switch on the playback device and approve the
connection. Please note the requirements of the
software on the playback device. The signal LED
will light up blue and a "Dood" signal sound.
GB 15