Wireless User Interfaces - Zodiac AquaLink TRi Montage- Und Gebrauchsanleitung

INSTALL SETTINGS
Assign Hotkeys >
Ext. SWC Power >
Diagnostics >
 Suivant 
 UI = Aqualink TRi® user interface firmware
 Bootloader = AquaLink TRi® internal OS firmware
 FFC = AquaLink TRi® electronic board firmware
 iAquaLink = iAquaLink™ antenna‐box firmware
 SWC = TRi® salt water chlorinator firmware (if present)
DIAGNOSTICS
Revisions >
Alerts >
RS‐485 Devices >
: only the ongoing alarm messages appear.
 : RS‐485 diagnosis:
 AQP = AquaPalm communications quality (if present)
 FFC = AquaLink TRi® internal communications quality
 VSP = Variable speed pump communications quality (if present)
 iAL = iAquaLink™ antenna‐box communication quality
 SWC = TRi® salt water chlorinator communication quality (if present)
 The percentages shown on the "DIAG‐RS‐485" screen are only indications and are not designed to
troubleshoot the communications quality between the equipment. A low value usually means low
quality or inappropriate cabling, or electromagnetic interference related to the bad position of the
appliance and/or its RS485 cable.
 The "E"s displayed on the right of the "DIAG RS‐485" screen express the number of information
exchange faults. They do not indicate an error or a fault but are related to the communications quality
percentage.
 The "E" counter can be reinitialised to zero by selecting "INIT Values".
3.6 Wireless User Interfaces
In addition to the existing user interface on AquaLink TRi® enclosure, it's possible to remotely manage the pool via
several wireless user interfaces:
- Dedicated Web access on www.iaqualink.com
- Free apps for compatible smartphones
- Optional AquaPalm remote control
3.6.1. www.iaqualink.com website
Once the AquaLink TRi® is installed and configured, you will need to register on www.iaqualink.com website to
create your iAqualink user account. It will be necessary to provide the iAquaLink™ antenna serial number (written
on the side of iAquaLink™ antenna and printed on door hanger).
 For further details, please refer to iAquaLink™ quick start guide provided in the iAquaLink antenna
carton box.
 Depending on your internet connection type, user interface commands responsiveness may be more or
less prompt. Do not attempt to select the same function repeatedly to prevent any unwanted « on/off »
situations on AquaLink TRi® unit
H0369400.B.EN – 2013/03
DIAGNOSTICS
Revisions >
Alerts >
RS‐485 Devices >

CURRENT ALERTS
REVISIONS
UI : 1.60
Bootloader : 0.26
FFC : 0.18
iAquaLink : 2.2.0
SWC : 3.00
DIAGNOSTICS
Revsions >
Alerts >
RS‐485 Devices >

RS‐485 DEVICES
AQP : 95% E : 3
FFC : 99% E : 1
VSP : 88% E : 12
iAL : 94% E : 5
SWC : 82% E : 25
. Clear Stats .
19