Home Screens; Initial And Current Settings - Zodiac AquaLink TRi Montage- Und Gebrauchsanleitung

3.2 Home screens
3.2.1 Main menu
Zodiac
14: 26
Pool mode Off
Temp1 Off
Temp2 Off
Aux1 Off
Aux2 Off
 More 
The second line on the screen alternatively displays the time, the air temperature, the water temperature (if
filtering is operating), solar temperature (if this function has been activated) and possible alarm messages.
The main menu displays the status of the main AquaLink TRi® functions. From this screen, all pool equipment
connected to the AquaLink TRi® can be activated or started.
3.2.2 Status
Zodiac
14: 26
Pool Mode On
Temp1 26°
Temp2 Off
Aux1 On
Aux2 Off
 More 
The home screen alternates with the "STATUS" screen if one or more items of pool equipment are operating.
This screen gives the detail of currently operating equipment.
The "Chlorination XX%" line only appears if a TRi® chlorinator is connected.
The eventual information messages issued by the chlorinator will also be displayed here ("No flow", "Check
salt", etc.).
3.3 Initial and current settings
3.3.1 Pool mode
Activating "Pool Mode" is used to operate the filtering pump by default, and all other related pool equipment
such as heating and water treatment.
H0369400.B.EN – 2013/03
Zodiac
14: 26
Settings
Devices
Service Mode
 More 
EQUIPMENT STATUS
Chlorinator 40%
Pool Mode
Temp1
Temp2
Aux1
Aux2

>
>

>
Filter Pump
Temp1

Aux1
Zodiac
14: 26
On
Off
Off
Off
Off
 More 
9