10
Demontage
10.1
Schritt 1
• Lösen der Torx-Klemmringschrau-
be M3 (TX10), dabei die Torx-
Klemmringschraube nicht aus dem
Klemmring herausdrehen!
10.2
Schritt 2
• Die Befestigungsschrauben der
Drehmomentstütze von der An-
bauseite herausschrauben.
3
Baumer_ATD2AH00_II_DE-EN_1811.indd
8
11
9
TX10
Demontage / Dismounting
10
Dismounting
10.1
Step 1
• Loosen the clamping ring screw
M3 with torx drive (TX10), do not
unscrew the clamping ring screw
from the clamping ring!
10.2
Step 2
• The fixing bolts of the torque sup-
port unscrew from the mounting
side.
Achtung:
Lose Teile können
herunterfallen!
Attention:
Loose parts can
fall down!
23