Use Of Hand Lift; Adjust Immersion Depth Of Evaporator Flask - Heidolph LABOROTA 4000eco Betriebsanleitung

Pull rotary knob (19) tight by turning clockwise ("lock").
15

Use of hand lift

The hand lift features a big-size handle (20) at the front end of the item. The lift is balanced
for the average weight of a standard glassware kit.
Depress lift handle (20) ("push") to unlock lift mechanism. Move lift handle (20) to the left
to lower, or to the right to raise the complete drive mechanism with glassware kit and
evaporator flask.
Release handle (20) ("push") to lock lift in the present position.
16

Adjust immersion depth of evaporator flask

The lift is used to immerse the evaporator flask in the bath fluid. To use the same
immersion depth for all distilling jobs, we recommend to firmly set immersion depth.
To this end loosen black rotary knob (22, fig. 15) on lift column by turning CCW ("unlock").
Vertical stop (15, fig. 17) drops (sustain by pulling down). Descend lift until reaching proper
immersion depth in heating bath (2). It may be required to sustain this action by hand. Pull
rotary knob tight (22, fig. 15) by turning clockwise ("lock"). At this point, immersion depth of
the evaporator flask is set permanently.
55
fig. 15
fig. 16
E