Drawing; Accessories; Location Identification Plate - Vermeiren Eclips X4 KIDS Gebrauchsanweisung

The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Wheeled mobility devices for use as seats in motor vehicles.
1.3

Drawing

1.4

Accessories

The following accessories are available for the Eclips X4 kids:

Anterior pelvic belt (B58) for mounting on the tubes of the back

Anti-tipping device (B78) for mounting on the bottom frame

Arm rests (B05, B82)

Foot rests (B06, BA6, BZ8, BZ7, BK6)

Table (B12)

Transit wheelchair (T30)
Contact your specialist dealer about other accessories. He will gladly advise you.
1.5

Location identification plate

1 = Cross
2 = Handgrips
3 = Backrest
4 = Armpads
5 = Arm rests (cloth protectors)
6 = Driving wheels (rear wheels)
7 = Hand rims
8 = Brakes
9 = Tip cap
10 = Steering wheels (Front wheels)
11 = Foot rests
12 = Seat
1 = Vermeiren name
2 = Crash tested
3 = Identification plate
Page 5
Eclips X4 kids
2016-01