Operation - Fakir SKYFALL Bedienungsanleitung

Operation

1. Hold the iron in a tilted position, then fill proper water
into water tank. by measuring cup, you had better
use purified water with less calcium particles and
make sure not to exceed Max level on the tank.
(See Fig 1.)
2. Press down cover of water tank and you will hear a
click if it is in the correct position.
3. Connect plug to outlet and turn temperature dial to
your desired setting, which is depended on the
fabric of garment. And indicator light will be
illuminated. Refer to Fig.2 and IRONING TIPS latter.
4. Make sure steam button is on dry position. (See fig
3), then place the iron vertically (See fig 4).
5. Once soleplate temperature has reached the preset
temperature, indicator light will be off, then set
steam button to your desired steam output or dry
position and begin ironing.
WARNING!
Not touch hot soleplate at any time before cooling
down!
6. Press spraying water button a couple of times to
moisten the laundry if necessary, before spraying
make sure that there is enough water in water tank.
7. Steam shot function had better be used at max
temperature, as it helps remove stubborn creases.
8. The iron has an anti-drip function: if ironing
garments for long time, soleplate temperature will
fall off, the iron will stop coming out steam
automatically and no water droplets can come out
from soleplate.
9. "Steam shot" can also be applied when holding the
iron in a vertical position, so this is useful for
removing creases from hung clothes, curtains, etc.
SKYFALL
19
(Fig. 1)
(Fig. 2)
(Fig. 3) (Fig. 4)
GB