·
If in doubt do not use the treadmill and contact our helpline.
TAKE CARE TO PROTECT CARPETS AND FLOOR in case of leakages. This product is a
machine that contains moving parts which have been greased / lubricated and could
leak.
4.3 Belt/Deck/Roller Lubrication
The mat/deck friction may play a major role in the function and life of your treadmill
and that is why we recommend you constantly lubricate this friction point to prolong
the useful life of your treadmill.
Lubrication is provided with this unit. You should apply the enclosed lubrication after
approximately the first 40 hours of operation. We recommend lubrication of the deck
according to the following timetable:
Light use (less that 3 hours per week) every 6 months
Medium use (3-5 hours a week) every 3 months
Heavy use (more than 5 hours per week) every 6-8 weeks.
See below procedures for lubricating:
6. Use a soft, dry cloth to wipe the area between the belt and deck.
7. Spread lubricant onto the inside surface of belt and deck evenly (make sure the
machine is turned off and power is disconnected).
8. Periodically lubricate the front and rear rollers to keep them at there peak
performance.
If the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over
800 hours before additional re-lubing is necessary.
4.4 How to check the running mat for proper lubrication
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
28
EN