Taurus ROWZER Originalbetriebsanleitung Seite 18

overheating.
- If the appliance turns itself off and
does not switch itself on again, wait
for approximately 15 minutes before
reconnecting. If the machine does not
start again seek authorised technical
assistance.
Awaiting JAR
Starting
Insert PORTION
2P
Cleaning wait
Cleaning Remove the JAR
Language
Once you hace finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Unplug the appliance to the mains.
- Clean the appliance
Cleaning
Disconnect the appliance from
the mains and let it cool before
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
Special messages:
The following messages can appear on
the screen:
Means that the jar is not in place or has been
incorrectly inserted.
Means that it is returning to its initial position
Means that it is operational awaiting insertion of
the portion
Means that a double processing will be
performed on the selected portions.
Means that the spindle is lowering to its lower
position
Means that the spindle has reached its lower
position and the jar may be removed in order to
clean the spindle.
Means that you have entered the language menu
to select the desired language.
Do not use any type of scourers.
- Do not use solvents, or products with
an acid or base pH such as bleach,
or abrasive products, for cleaning the
appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
- Must not be cleaned using jets of
water.
- During the cleaning process, take
special care with the blades, as they
are very sharp.
- It is advisable to clean the appliance