Taurus ROWZER Originalbetriebsanleitung Seite 16

for operations different to those
designated may cause a dangerous
situation.
- Periodically check that the sealing
joint of the lid is in perfect condition.
- Do not force open the lid, make
sure the appliance is completely
depressurized prior to opening.
- Never leave the appliance connected
and unattended if is not in use. This
saves energy and prolongs the life of
the appliance.
- After having produced 10 continuous
portions, respect the 5-minute rest
period.
- Pay special attention during the
assembly and disassembly of blades,
as they are sharp and could cause
harm.
Service:
- Make sure that the appliance is
serviced only by specialist personnel,
and that only original spare parts
or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer's
liability null and void.
Installation
- Be sure to remove all packaging
material from inside the appliance.
- Do not remove the support feet of
the appliance.
- The product can be levelled by
adjusting the legs.
- Respect the legal provisions with
regard to safety distances from other
elements such as pipes, electrical
conduits, etc.
- Do not cover or obstruct any of the
openings of the appliance.
- The plug must be easily accessible
so it can be disconnected in an
emergency.
- For greater efficiency, the appliance
must be situated in a location where
the ambient temperature is between
12 and 32ºC.
- The appliance must function with its
base feet coupled.
Instructions for use
Before use:
- Remove the appliance's protective
film.
- Make sure that all the product's
packaging has been removed.
- Before using the product for the first
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
- Work with the food you want to
process.
- Fill the deposit (F) taking care to
observe the MAX level (Fig. 1)
- Freeze the vessel with the food to
-20ºC
Language selection:
- Place the jar in the machine with the
handle to the user's right-hand-side
(Fig. 2)
- Couple the jar by turning it 90º
clockwise. When it reaches the correct
position you will hear 2 clicks (Fig. 3)
- The screen will display the message
"Insert PORTION: 0 "
- Press the "+" and "-" buttons and
the "Language" message will appear
in the screen. Use the "+" and "-"