Herunterladen Inhalt Inhalt Diese Seite drucken

Garantiebestimmungen; Warranty - Viessmann 5240 Bedienungsanleitung

Lokdecoder
Vorschau ausblenden Andere Handbücher für 5240:
Inhaltsverzeichnis

Werbung

Ein Ausgang lässt sich nicht einschalten.
eingestellt, die die Ausgangsspannung zu klein
einstellen.
Lok fährt nicht im Analogbetrieb.
Mögliche Ursache: Der Analogbetrieb ist ausge-
CV-Werte nicht über RailCom
Licht geht beim Hochschalten der Fahrstufen an
und aus oder es lässt sich nicht ein- / ausschalten.
Mögliche Ursache: Fahrstufenmodus des De-
coders und der digitalen Zentrale stimmen nicht
überein.
Fahrstufen, der Decoder jedoch im Modus 14
Fahrstufen. Ändern Sie den Fahrstufenmodus an
der Zentrale und / oder am Decoder.

8. Garantiebestimmungen

tungszeitraum beträgt 2 Jahre ab Kaufdatum.
Tritt in dieser Zeit ein Fehler auf, setzen Sie sich
nach Überprüfung des Modells ein Herstell- oder
Materialfehler festgestellt, wird das Modell kos-
tenlos instand gesetzt.
schlossen sind Beschädigungen des Modells
sowie Folgeschäden, die durch unsachgemäße
Behandlung, Nichtbeachten der Bedienungsan-
leitung, nicht bestimmungsgemäßen Gebrauch,
Überlastung, unzulässig hohen Umschaltimpuls
wirkung, Feuchtigkeitseinwirkung, Überhitzung
nehmen Sie bitte Kontakt mit uns auf
Senden Sie das Modell zur Kontrolle bzw. Repa-
ratur bitte erst nach Rücksprache mit uns an den
22
-
®
auslesbar.
®
ist ausgeschaltet.
-
-
-
-
An output cannot be switched on.
The locomotive does not run in analogue
mode.
CV values cannot be read out with RailCom
The lights cannot be switched or go on and off
when turning up speed steps.
decoder and the command station do not corre-
spond with each other.
steps and the decoder to 14 speed steps. Change
the speed steps either on the command station or
on the decoder.

8. Warranty

ing from the date of purchase. Please contact
be the cause of the failure we will repair the model
free of charge.
and liability are damages of the model and conse-
quential damages due to inappropriate handling,
disregarding the instructions of this manual, inap-
sible high change-of-direction impulse of analogue
train layout, unauthorized disassembling, con-
ing, exposure to humidity and similar.
®
®
is turned off. Check the
-
.
-
-
-

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5241

Inhaltsverzeichnis