If Something Doesn't Work - Teka TZ 3210 Einbauanleitung

GB

If something doesn't work

Before calling the Technical Service, please
make the following checks:
Fault
The touch control will not turn on or, when it is on, it does not respond
During cooking it suddenly starts to beep
The hob (or one of the hotplates) turns off during cooking
F
An appears on the visual display
Possible cause
There is moisture on the
sensors and/or you have
moist fingers.
The lock is activated.
There is a cloth, container
or some liquid on top of the
keypad.
The timer was switched on
and the programmed time
has elapsed.
There is a cloth, container
or some liquid on top of the
keypad.
One or several of the hobs
has overheated.
Electrical failure.
40
Possible solution
Keep the keypad surface
and/or your fingers clean and
dry.
Deactivate the lock.
Remove any object that is
covering the keypad, and/or
clean up any liquids split on
it.
Press the timer sensor to
deactivate the beeping.
Remove any object covering
the keypad.
Leave the overheated hobs to
cool down for a few minutes
before turning them on again.
Call Technical Support.