Teka TZ 3210 Einbauanleitung Seite 37

ching sensor (1), even if it has been loc-
ked (locking function activated). Sensor
(1) is always able to disconnect the
touch control panel.
ACTIVATING THE HEATING ELEMENTS
The heating elements are deactivated,
with their respective power indicators (3)
0
to , until a power level is chosen. If all of
the heating elements are at
seconds to activate one of them; otherwi-
se, the touch control panel will turn off
automatically.
Use the sensor
a power level. If you touch sensor button
(5), the heating element will reach level
1
and for each additional touch, the
power level will increase until a maximum
9
of . Using sensor button
reduce the power level.
To rapidly turn the heating element on
to the maximum power: with the heating
0
element at , touch sensor button
The heating element will activate at its
maximum power level (level
If you keep touching either of these two
sensor buttons, they will repeat the action
every half second, and it is not necessary
to make successive pulsations.
TURNING OFF THE HEATING ELE-
MENTS
Use sensor button
power level to level 0. The heating element
will turn off automatically.
To rapidly turn the heating element off:
regardless of the power level, if you simul-
taneously touch the sensor buttons
and (5/4), the heating element will turn
off immediately.
0
, you have 10
and (5/4) to choose
(4), you can
9
).
(4) to lower the
When a heating element is turned off, an H
will appear in its power indicator if the
glass surface is hot, which means that
there is a risk of burns. When the tempera-
ture has decreased, the indicator will turn
off, if the hob is disconnected or, if it is con-
nected, the indicator will have a
TURNING OFF THE APPLIANCE
You can turn off the hob at any time by
pressing sensor button
so, you will hear a sound and the power
indicators (3) will turn off, provided that the
residual heat
be activated.
Locking the hob's sensors
You can use the locking sensor button
( 6 ) to lock all of the sensor buttons of
the control panel. This will allow you to
prevent undesirable operations from
occurring accidentally and it will make is
so children are not able to manipulate
the device. Once the sensor button lock
(4).
has been acti-vated, indicator light (7) will
turn on.
Nonetheless, if the touch control panel is
on, it is possible to turn it off using the
on/off sensor button
appliance is locked (indicator light 8 is
on). On the other hand, if the touch control
panel is turned off, the locking function
does not allow the on/off sensor button
(1) to be used.
To deactivate the locking function, press
locking sensor button
corresponding indicator light (8) will turn
off and it will be possible to once again use
the rest of the sensor buttons on the con-
trol panel.
35
0
(1). When doing
H
indicators do not need to
(1) even if the
(6) again. The
GB
.