Technical Data - Atos Medical PROVOX Micron HME Bedienungsanleitung

Provox Micron HME is not only an HME, Provox Micron HME
is also equipped with a layer of electrostatic filtration material. The
filter consists of synthetic fibres which, during the manufacturing
process, generate electrical charges on the fibre surface. The result
is a highly stable, coarse fibred electrostatic filter media with high
efficiency against sub-micron particles (see Technical data) and low
air flow resistance.
Measurements:
Height
Length
Width
Weight:
Pressure drop after 1 h at:
(According to ISO 9360)
Pressure drop after 24 h at:
(According to ISO 9360)
Moisture output:
(According to ISO 9360)
Moisture loss at VT=500 ml:
(According to ISO 9360)
Bacterial Filtration Efficiency (BFE):
(According to ASTM F2101)
Virus Filtration Efficiency (VFE):
(According to MIL-M-36954C and ASTM F2101)
6
Electrostatic filtration

Technical Data

20 mm
43 mm
53 mm
4 g
30 l/min
60 l/min
90 l/min
30 l/min
60 l/min
90 l/min
22 mg/L
22 mg/L
0.7 hPa
1.9 hPa
3.5 hPa
0.7 hPa
1.8 hPa
3.5 hPa
≥ 99.8%
≥ 99.8%