Notes On Environment; Warranty - Gesipa FireFox 2 Betriebsanleitung

Nut is not removed by turning
Cause
Nut thread deformed
Removal period too short
Nut not automatically removed
Setting stroke or setting force not
reached
Nut stuck on threaded mandrel
Set nut is loose
Cause
Setting stroke "Y" too short
Setting force too low
Air pressure too low
8.

Notes on environment

Dispose of hydraulic waste oil according to current environmental regulations.
Observe regulations about dangerous substances!
9.

Warranty

The applicable terms and conditions of guarantee shall apply and can be viewed under following
link: www.gesipa.com/agb
Remedy
Setting stroke or setting force too great
 reduce (see item 4)
Hold activation button down for longer
Keep holding down activation button until
nut has been automatically removed
Keep holding down activation button until
nut has been automatically removed; if
necessary, refil hydraulic oil
Increase network pressure (max. 7 bar)
Reduce setting force (see item 4)
Remove by pressing the removal button
7 or unscrew with the help of a hexagon
screw driver (see item 5.3)
Remedy
Increase setting stroke (see item 4.1)
Increase setting force (see item 4.2)
Increase air pressure to 5-7 bar
GB
25