Preparatory Steps; Lowering The Vehicle; Cleaning And Care - ULTIMATE SPEED KH 3046 Bedienungsanleitung

Preparatory steps

1. Push the lifting levers
Turn them until they are secured against being
pulled apart.
2. Place the lifting levers
r
at the front.Turn it clockwise to close it
completely.
3. Now place the lifting levers
t
collet .
4. Turn the lifting levers
secure against being pulled out.
5. On the first utilisation or after an extended
period of non-usage, first pump the Trolley Jack
without any loading (6-7 pump movements).
This distributes the hydraulic oil evenly again
inside the device.
Raising the vehicle
Important: Refer to the vehicle owner's
handbook to find out where the lifting points are
located. To avoid damage, the vehicle may only
be raised at these places.
1. Push the loading plate
middle below the lifting point.
Note: Ensure that you place the vehicle jack in
such a position that the lifting levers
under the vehicle.
2. To start, only pump until the loading plate
just touching the lifting point. This permits you to
make corrections if needed.
3. Now raise the vehicle until you have sufficient
clearance to position the axle stands.
4. Permit the vehicle to drop onto the axle stands in
that you slowly open the release valve
turning it in an anti-clockwise direction.
q
into each other.
q
onto the release valve
q
in the lifting lever
q
clockwise until they are
w to exactly in the
q are not
w
r
by

Lowering the vehicle

1. First raise the vehicle a little to remove the axle
stands.
2. Then, with the lifting lever
release valve
allow the vehicle to descend.
3. As soon as the Trolley Jack is removed from
under the vehicle, the loading plate
completely pressed down with the foot.

Cleaning and Care

Note: The hydraulic fluid may only be topped
up by a trained technician, or by customer
service.
The Trolley Jack can simply be cleaned with a
lightly oiled cloth.
Note: Do not alter the setting of the factory set
adjustment screw, this is only intended for
repairs carried out by customer services.
Storage
Lower the lifting arm completely. This permits space-
saving storage of the Trolley Jack.
is
- 15 -
q
, slowly turn the
r
(anti-clock-wise) and carefully
w
can be