Power On/Off - Clas Ohlson AWD-37TBT Bedienungsanleitung

Connection
1. Connect the speakers together by plugging the Mini USB connector on the end of
the cord permanently fitted to speaker 1 into the socket on speaker 2.
2. The speakers are powered via the included USB cable. Connect the cable to
the USB POWER socket on speaker 1 and to a power source with a USB outlet
(USB charger, computer, TV, etc) which provides a charging current of at least
500 mA, preferably 1000 mA.

Power on/off

Depress the on/off button (4) for two seconds to switch the speakers on.
Note:
• The speakers start in Bluetooth mode if no audio cable is connected to
the AUDIO IN socket when the speakers are switched on.
• The speakers start in AUX mode if an audio cable is connected to the AUDIO IN
socket when the speakers are switched on.
• Depress the on/off button (4) for two seconds to switch the speakers off.
Connecting an external Bluetooth device
1. Make sure that there is no audio cable plugged into the AUDIO IN socket.
2. Switch the speakers on.
3. Activate Bluetooth on the device to be paired with the speakers.
4. The speakers will appear on your device as AWD-37TBT, select them and pair
them with your device. Note: If you are prompted to enter a PIN code on your
device, you should enter 0000 (four zeroes). Certain devices may also require you
to approve the connection.
5. Start playback on your device. Set the desired volume levels both on the external
device and the speakers. Other playback settings should be controlled from
the external device.
6. The speakers will reconnect automatically with the device with which they were last
paired when they have been switched back on again and the Bluetooth function is
activated.
Connecting an external device to the AUDIO IN socket
1. Connect your external audio device (e.g. smartphone) to the AUDIO IN socket on
speaker 1 using the included 3.5 mm audio cable.
2. Switch the speakers on.
3. Start playback on your device. Set the desired volume levels both on the external
device and the speakers. Other playback settings should be controlled from
the external device.
4