Acoustic Messages; Tone Signals Used; Key Click - Motorola MR 11 S-C Bedienungsanleitung

923991 19.10.1999
GB
This overrun may occur for example in the "Notes" menu. Move the cursor
towards the right hand side of the display to recover characters which have
"overrun" to the right. You can then move back one character at a time in the
display by pressing the cursor key. In the case of an overrun to the left, the
cursor jumps back to the first input position when the button is kept pressed.

Acoustic Messages

Some signals are indicated only acoustically in addition to the only optically
signalled operating states.

Tone Signals Used

Two tone frequencies are used to distinguish between the individual mes-
sages. High tones (frequency approx. 1200 Hz for positive messages) and
low tones (frequency approx. 400 Hz) for negative messages.
Four different tone lengths are possible depending on the programming:
long
medium
short
very short (click)
High tones are represented hereinafter as a block above the line, low tones
as a block below the line. The four tone lengths give the following images:
high, long
high, medium
high, short
high, click
low, long
low, medium

Key Click

A high, very short tone.
62
10:28 Uhr Seite 62
approx. 1 second
approx. 0.35 seconds
approx. 0.1 seconds
approx. 20 milliseconds