Units Of Measurement ����������������������������������������� 28 16.6 Data Table; Other Symbols In This Documentation; Safety; Intended Use - STIEBEL ELTRON SHZ 30 LCD Bedienung Und Installation

OPERATION

Safety

1.2

Other symbols in this documentation

Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully. f
Symbol Meaning
Material damage
!
(appliance, consequential and environmental damage)
Appliance disposal
f This symbol indicates that you have to do something. The ac- f
tion you need to take is described step by step.
1.3 Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
28 | SHZ LCD
2. Safety
2.1

Intended use

The appliance is intended for heating domestic hot water and can
supply one or more draw-off points, depending on the operating
mode.
This appliance is designed for domestic use. It can be used safely
by untrained persons. The appliance can also be used in a non-
domestic environment, e.g. in a small business, as long as it is
used in the same way.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
Any modifications or conversions to the appliance void all war-
ranty rights.
2.2

Safety instructions

WARNING Burns
During operation, the tap or safety assembly can reach
temperatures in excess of 60 °C.
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and up
and persons with reduced physical, sensory or mental
capabilities or a lack of experience provided that they
are supervised or they have been instructed on how to
use the appliance safely and have understood the result-
ing risks. Children must never play with the appliance.
Children must never clean the appliance or perform user
maintenance unless they are supervised.
Material damage
!
Protect the water lines and the safety assembly against
frost.
Note
Sealed unvented operating mode: The appliance is under
pressure. During the heat-up process, expansion water
will drip from the safety valve. If water continues to drip
when the heat-up process is completed, please inform
your qualified contractor.
Note
Open vented operating mode: Whenever water is heated
up, expansion water will drip from the spout.
2.3

Test symbols

See type plate on the appliance.
www.stiebel-eltron.com