Cleaning And Care - Klarstein 10030415 Bedienungsanleitung

Mode
The initial wind mode remains on "Normal" , press MODE button to switch between " Normal" – "Natural" – "
Sleeping" – " ECO", the LED indicator changes accordingly. All mode have its accordingly LED indicator on the
panel, but the Normal mode.
Running conditions for different modes
Normal HI Speed
MED Speed
LOW Speed
Natural Oscillogram for 3 natural wind (HI, MED, LOW).
Sleep HI: 30 minutes "HI" natural wind—30 minutes "MED" natural wind—Remain "LOW"
natural wind speed
MED: 30 minutes "MED" natural wind—Remain "LOW" natural wind
LOW: Remain "LOW" natural wind speed
ECO Under this mode, the machine works in Low speed when ambience temperature < 25 ; in
Hi speed when > 29 ; in Med speed when 25 ~29 .("Speed" button and the indicator for
speed will not work under this mode.)
Connservation When in standby mode, wind speed mode and oscillation will all be conserved. (But
timing and sleeping mode will not be conserved)
Auto dimming The indicator would dim automatically if no operation for above 1 minute; showing 30%
of original Brightness.If press the button at this moment,the indicator will light up again.
Usage for remote control
One button battery (CR2032 3V) has been used in our remote control. Ple-
ase insert the battery to remote control tightly based on the direction of the
polarity. If it does not use for a long time, please pull the battery out from the
remote control.
If there is too much dust or dirt on the front grid cover of the fan, the performance of air-out would be affected,
so we suggest clean the fan once per month at least.
• Always remember unplug the fan before cleaning, or may cause electric shock or product damage.
• Wipe all parts with a soft cloth. Do not use any of the following as a cleaner: gasoline, thinner, benzine.

Cleaning and Care

12