Use And Operation - Klarstein 10030415 Bedienungsanleitung

Display and Indicator Lights
7 On/Off/Standby
8 Natural Mode
9 Sleep Mode
10 ECO Mode
11 Timer
12 HI Speed
13 MED Speed
14 LOW Speed
15 Horizontal Oscillation
16 Vertikal Oscillation
Installation
1. Take out parts for assembling.
2. Put the power cord through the hole of base, stand the support on the base and fix them tightly by screw
(Picture 1).
3. Place the machine body into the tube-shape pillar (Picture 2).
4. Then, take out the grub screw and cross screwdriver to fix the body on the tube-shape pillar (Picture 3).
5. After the below installation, plug in and operate according to the following instructions when placing on the
flat ground (Picture 4).

Use and Operation

10