Use And Operation - Klarstein 10030977 Bedienungsanleitung

1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counterclockwise
to remove both of them. Fix the rear grill to the motor then tighten the plastic nut again.
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove of the blade. Turn the spin-
ner counterclockwise to tighten the blade.
3. Fix the front grill and the rear grill with circlip clip and then use the fasten clip to tighten the fan grill.
Getting started
Plug in the power adapter, after a „beep" tone, the fan is on standby.
Keys and Functions
ON/OFF KEY
Press this button under standby mode,the fan starts at memorial speed which it worked last time.
Press this button when the fan is working,it will be turned off to standby state.
DRIVE PLATE
When you rotate the drive plate clockwise,the speed increases from the following manner:normal
wind 01......When you rotate the drive plate counter-clockwise,the speed decreases from the fol-
lowing manner:normal wind 12...
MODE KEY
Repeat press this button, the wind will be switched in order of "normal wind - natural wind - sleep
wind - comfort - silence - normal wind - ... „.Normal wind: The wind speed is constant set by the
wind level, when the „normal wind" icon is lit, 01 - 12 levels are normal wind
• Natural wind: Fan will simulate natural wind according to pre-programmed manner, the wind
speed changes in accordance with the program, which makes people feeling idle, naturally and
it likes to be in the nature.
• Sleep wind: The wind weakens step by step during the preset time until stop. And then the fan
switches automatically off so that man can drop asleep.
• Comfortable wind: The speed will be changed with the room temperature intelligently. If the
temperature is lower than 20°C,the fan will stop working.If the temperature is higher than 20°C,
the fan will work again. When you choice comfortable wind, the icon will be lighted and the IDM
display"00".
• Silence: Press this key to make the fan switch to the mute mode, in which the noise is low and the
mute indicator "
and work at the low speed.

Use and Operation

"will be on. Press this key again, the fan will switch to the normal air mode
12