Manual Totalizing - KERN KIB-TM Betriebs Und Installationsanleitung

7.8 Manual totalizing

With this function the individual weighing values are added into the summation
memory by pressing
• Menu setting:
„P2 COM"  „MODE"  „PR2"", see chap. 8
• The totalizing function is not active when the weight is under 20d.
Add up:
 Place load A.
Wait until the stability display
be saved and printed if an optional printer is connected.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place good to be weighed B.
Wait until the stability display appears, then press
added to the summation memory and printed, as required. The number of
weighings, the whole weight and the currently placed weight will be shown in
succession.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 This process may be repeated 99 times or till such time as the capacity of the
weighing system has been exhausted.
Display and edit sum „Total":
 Press
, the number of weighings, followed by the total weight will be displayed
for 2 sec. Press
KIB-TM-BA_IA-e-1811
and edited, when an optional printer is connected.
appears, then press
to print out this display.
. The weight value will
. The weight value will be
27