Manual Totalizing - KERN KFE-TM Betriebs Und Installationsanleitung

7.7 Manual totalizing

With this function the individual weighing values are totalized into the sum memory
by pressing .
• Menu settings:
„F5 Prt"  „P prt", see chap. 8.2
"P4 CHk"  „mode 1", see chap. 11.4
• The totalizing function is not active when the weight is under 20d.
Add up:
 Place weighing goods A.
Wait until the stability display
value is saved.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place goods to be weighed B.
Wait until the stability display appears, then press
added into the summation memory. Number of weighing, followed by the total
weight will be displayed for 2 sec.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 You can repeat this process 99 times until the capacity (max) of the weighing
system is exhausted.
Display of the saved weighing data:
 When zero is displayed press
weight will be displayed for 2 sec.
22
appears, then press
STABLE
, the number of weighings followed by the total
. The weighing
. The weighing value is
KFE-TM-BA_IA-e-1614