Operation; Start-Up; Switching Off; Zeroing - KERN KIB-TM Betriebs Und Installationsanleitung

7 Operation

7.1 Start-up

 Press
, the appliance will carry out a self-test. As soon as the weight display
appears, the instrument will be ready to weigh.

7.2 Switching Off

 Press
, the display will disappear.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate. The unit
is equipped with an automatic zero setting function. Therefore the unit can be reset to
zero at any time as follows:
 To unload the weighing system
 Press
and zero display as well as indicator

7.4 Simple weighing

 Place goods to be weighed on balance.
 Wait for stability display
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding the maximum load is indicated by the display
and an audio sound. Unload weighing system or reduce preload.
KIB-TM-BA_IA-e-1811
.
will appear.
19