KERN KIB-TM Betriebs Und Installationsanleitung Seite 94

BAUD
Pr
PTYPE
LAb
Prt
LAnG
1
P3 CAL COUNT
DECI
Configuration
DUAL
data
see chap. 12.4
CAL
GrA
GrB
P4 OTH
LOCK
ANM
SCr
38
For automatic totalizing see chap. 7.9
AUTO*
This function is used to issue and add individual
weighing values automatically to the summation
memory on unloading of weighing scale.
Remote control instructions
ASK
wirel Not documented
Available Baudrate: 600, 1200, 2400, 4800, 9600*
7E1
7 bits, even parity
7o1 7 bits, odd parity
8n1* 8 bits, no parity
tPUP* Standard printer setting
LP50 Not documented
LAb x For data output format,
see table below. 1
Prt x
eng* Standard settings English
chn Not documented
Display internal resolution
Position of the decimal dot
Setting balance type, capacity (Max) and readability (d)
off Single-range balance
R1 inc
R1 cap
on Dual range balance
R1 inc
R1 cap
R2 inc
R2 cap
noLin For adjustment, see chap. 6.9.2
Liner For linearization, see chap. 6.10.2
Gravitational constant at place of installation
Gravitational constant at place of manufacture
on Keyboard lock enabled, see chap. 7.13
off* Keyboard lock disabled
on Animal weighing enabled, see chap. 7.12
1
off* Animal weighing disabled
watch as screensaver enabled
on
watch as screensaver disabled
off*
Readability
Capacity
Readability 1st weighing range
Capacity 1st weighing range
Readability 2nd weighing range
Capacity 2nd weighing range
KIB-TM-BA_IA-e-1811