Klarstein Heatbox Handbuch Seite 19

Control Panel
1 Signal receiving window: For receiving remote control signal.
2 Digital display Indicate set room temperature or time
3 Power indicator light Indicates that the heater is receiving power from outlet.
Will flash when powered "ON"
4 ON/OFF button: Powers the display on and off.
5 Energy-saving mode indicator: Will be lit when energy-saving mode is
engaged.
6 Mode button To select between High Low and Eco modes.
7 Low Mode indicator light: Will be lit when Low Heat mode is engaged.
8 Temp up button: To increase desired temperature.
9 High Mode indicator light: Will be lit when High Heat mode is engaged.
10 Temp down button: To decrease desired temperature.
11 Timer indication light Will be lit when the Timer mode is engaged.
12 Timer button Used to engage timer mode and to set hour value for the timer.
13 Fahrenheit indicator light: Will be lit when temperature displayed is in
Fahrenheit.
14 °C/°F Button : Alternates between Fahrenheit and Celsius.
15 Celsius indicator light: Will be lit when temperature displayed is in Celsius.
EN
19