Invacare Aquatec Ocean Gebrauchsanweisung Seite 11

6. Turn the seat frame and repeat the procedure on the
second side part.
7. Set the seat frame with the fitted side parts on its
wheels.
Adjusting the seat height
WARNING!
– The seat height must be adjusted to suit the
user. As a rule, the seat height is correctly
adjusted when the user is sitting on the
commode and both feet touch the ground.
– The seat height must be adjusted to the same
height on both sides.
– Do not adjust the seat height when someone is
sitting on the shower and toilet commode.
1. Raise the shower and toilet commode slightly on one
side by the seat frame B.
2. Remove both clips F on this side.
3. Pull the seat frame out of the side part A or push it
into the side part to adjust the seat height.
4. Push both clips back in completely.
5. Repeat step 1 – 4 on the other side.
Fitting the base stabilization tube (Ocean XL only)
1552757-G
1. Fit the base stabilization tube A using the screws and
nuts B supplied between the side parts C.
Fitting the backrest
1. Push down all four foot pedals for the castors to lock
them.
IMPORTANT!
– Make sure the armrests are facing forward
when folded up.
Setup
11