Alde Compact 3010 Betriebsanleitung Und Installationsanleitung Seite 9

13. External start
This function is used if you wish to start the heater
in the caravan from outside. To use this function it is
necessary to have an installation for external start (see
1 Press the button with the arrow
until the "Ext" symbol flashes.
The "OFF" text is shown next to
the temperature in the display.
blinkar
flashes
4 Off and Ext are shown in the
display when the panel returns
to standby. External start is
activated.
14. Automatic temperature change
This function is used when you wish to set automatic
temperature change, for example, during the night.
1 Press the button with the arrow
until the symbol for automatic
temperature change flashes. The
temperature and the "OFF" text
are shown on the display.
blinkar
flashes
4 Then press Store and the start
time is displayed. Adjust the start
time (the same procedure as in
12) and press the "Store" button.
flashes blinkar
blinkar
flashes
vehicle manual). To activate external start, first light up
the lower menu row of functions (see item 11).
 Press the +/On button. The
"ON" text is shown next to the
temperature in the display.
blinkar
flashes
When external start is activated
the heater will start with the latest
settings and "ON" (main breaker)
comes on. If 12V is not connected
to the heater, the display will not
light up until 12V is connected.
The external start function is still
activated.
Auto
In order to activate automatic temperature change, first
light up the lower row of functions (see item 11).
 Press the +/On button. Set
flashes and the OFF text is
shown in the display. Press +/On
to activate the function. "ON" is
shown in the display.
Set
blinkar
flashes
5 Now adjust the stop time and
press "Store" again. The text field
shows the required temperature
and ON.
blinkar
flashes
GB
3 Press the button with the arrow
until the On symbol (main
breaker) flashes. Press -/Off.
blinkar
flashes
To switch off external start, go to
the "Ext" symbol in the on position
and press the -/Off button.
3 Press the left arrow key.
The required temperature is
displayed. Then adjust the
temperature by pressing the
+/On or -/Off button.
Set
blinkar
flashes
6 If you want the temperature
change to be repeated daily,
select day 0.
Auto is shown in the display
when the panel returns to
standby.
9