Warm Water - Alde Compact 3010 Betriebsanleitung Und Installationsanleitung

4. Set the temperature you want in the vehicle
The temperature of the vehicle can be set from +5°C to
+30°C at intervals of 0.5°C.
1 Press the button with the arrow
until the symbol for selecting
temperature flashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
blinkar
flashes

5. Warm water

If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
1 Press the button with the arrow
until the symbol for selecting
warm water flashes. The
"OFF" text is shown next to the
temperature on the display.
blinkar
flashes
If you want you can switch off more warm water before
30 minutes have elapsed.
1 Press the button with the arrow
until the warm water symbol
flashes. The "ON" text is shown
next to the temperature on the
display.
blinkar
flashes
6. Heating with gas
Do as follows to activate heating with gas.
1 Press the button with the arrow
until the gas heating symbol
flashes. The "OFF" text is shown
next to the temperature on the
display.
blinkar
flashes
6
GB
 Increase the temperature by
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the temperature
at 25.0°C.
blinkar
flashes
 Switch the warm water on by
pressing the +/ON button.
The "ON" text is shown next to
the temperature on the display.
blinkar
flashes
 Switch off the warm water by
pressing the -/Off button.
The "OFF" text is shown next to
the temperature on the display.
blinkar
flashes
 Select gas heating by pressing
the +/On button. The "ON" text is
shown next to the temperature
on the display.
blinkar
flashes
3 The settings are complete and
the boiler is working at the set
temperature.
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you have
selected more warm water, the circulation pump stops.
3 The warm water symbol is
displayed when the panel returns
to standby.
3 The warm water symbol goes
out when the panel returns to
standby.
3 The gas heating symbol is
displayed when the panel returns
to standby.