B) Replacing The Tail Propeller; Disposal; A) Product; B) Batteries - Reely Earthquake Bedienungsanleitung

b) Replacing the tail propeller

The tail propeller (1) can be easily removed from the motor
shaft (2) by hand.
When attaching the replacement propeller, ensure that it is
horizontal, otherwise it may bend the motor shaft.
Regularly check that the screws on the helicopter are se-
curely in place. All movable parts should move freely, but
there should not be any slackness in the bearing.
Important!
When replacing mechanical parts, always
purchase genuine replacement parts from the
manufacturer.
The spare parts list can be found in the downloads section
of our website (www.conrad.com).
You can also order the spare parts list by calling our customer service hotline. For contact details, please refer to the
"Introduction" section at the beginning of these instructions.

12. Disposal

a) Product

Electronic devices are recyclable waste and must not be placed in household waste. At the end of its
service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.

b) Batteries

You are required by law to return all used batteries (Battery Directive). They must not be placed in household waste.
Batteries containing harmful chemicals are labelled with this symbol to indicate that disposal in household
waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury,
Pb = Lead (indicated on the battery, e.g. below the waste bin icon on the left).
Used batteries can be returned to local collection points, our stores or battery retailers.
You thus fulfil your statutory obligations and contribute to protection of the environment.
Figure 15
41