Loudness On/Off - Peiying PY6334 Bedienungsanleitung

Owner's manual
MO/ST SELECTOR
Press SEL button and select ST MONO or STEREO mode. When "ST"appears in the LCD dis- MONO or STEREO mode. When "ST"appears in the LCD dis-
play. During the player mode, press the button to switch left speaker/right speaker/stereo.
LOC/DX SELECTOR
Press SEL buttom and choose LOC to select strong or weak station reception. It is set to LOC
mode when LOC(21) button is first pressed. "LOO" appears and only local station is available. It is
switched to DX mode when LOC(21) button is pressed again. Both distance and local stations can
be received.

LOUDNESS ON/OFF

Press SEL button, and choose LOU to increase the low frequency. This can improve the sensitivity
of your ears. And " LOUD" appears in the LCD when the loudness mode is activated.
SCAN
Press scan button (29) to search radio station. When a station signal strength level is more than
the level to stop The radio will playing the station for 5 seconds and the frequency blinking on the
LCD at the same time.
Press and hold scan button (29) more than 3 seconds to select the station which you desired The
radio will start play the station.
AREA SETUP
In Radio mode' Press SEL button for several seconds, LCD will be show from DSP OFF/ON
AREAUSA/EUR. At AREA USA/EUR. You can use VOL +/- to select the AREA frequency.
EN
12