Select Mode; Liquid Crystal Display - Peiying PY6334 Bedienungsanleitung

SELECT MODE

By pressing this button(5) to go to different function mode:
-Tuner (radio)
-USB
to go to this mode USB device must be connected.
- Memory Card
to go to this mode must be have a Memory Card in.
-AUX in put
TIME ADJUSTING
Press and hold the SEL button until the current time is displayed. Then Press the vol "+" to
adjust hours, and press the vol "-" to adjust minutes. After you finish the time adjustment, press
SEL button to confirm the time setting.

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (7).
FLASHING LED
When ACC off ,take out the from panel from main unit that the LED (8) will be flashing.
EN
10
Owner's manual