Radio Operations - Peiying PY6334 Bedienungsanleitung

Owner's manual

RADIO OPERATIONS

BAND SELECTION
At tuner mode, press BAND button (10) to select the desired band. The reception band will
change in the following order:
STATION SELECTION
Press TUNE/SEEK/TRACK FORWARD button (11) or TUNE/SEEK/TRACK
REVERSE button (12) shortly for manual tuning function.
Press for several seconds the automatic tuning mode (SEEK
mode) is selected.
AUTOMATICALLY MEMORY STORING & PROGRAM SCANNING
-Automatically Memory Storing
Press AMS(MP3) button (13) for several seconds, the radio searches from the current frequency
and checks the signal strength until one cycle search is finished.
And then 6 strongest stations are stored into the corresponding preset number button,
- Program Scanning
Press AMS(MP3) button (13) shortly to scan preset station. When the AMS mode is carry out,
"INT" appear on LCD display, the unit scan each stored station for 5 seconds, you also can press
the corresponding number button or AMS button. Your desired station will start playing.
STATION STORING
Press preset button (14~19)
1) RADIO MODE.
M1 ~ M6
- PRESET MEMORY is loaded when key is pressed for less than 1 second.
- PRESET MEMORY is saved when key is pressed for longer than 1 sec.
2) CD/MP3/FLASH MP3
PLAY/ PAUSE
Press preset button (14) is activated. During a PAUSE, DISC INDICATOR flashes.
TOP - First song will play when Top key is pressed for lunger than 0.5 sec during play.
INT
Press preset button (15) During INTRO ON, INT indicator comes on and begins playing the first
EN
10sec of each song, until the last song is played. It begins playing the entire track from where INT
started
11