Loudness On/Off - Peiying PY-9398 Bedienungsanleitung

Owner's manual
MUTE OFF/ON
Select "MUTE on " mode to cut down the speakers output, return to "MUTE OFF"
mode to resume the speakers output.
LOC/DX SELECTOR
Press SEL buttom and choose LOC to select strong or weak station reception. It is set to
LOC mode when LOC is first pressed. "LOC" appears and only local station is available. It is
switched to DX mode when LOC is pressed again. Both distance and local stations can be
received.

LOUDNESS ON/OFF

Press SEL button, and choose LOU to increase the low frequency. This can improve the sensi-
tivity of your ears. And " LOUD" appears in the LCD when the loudness mode is activated.
MO/ST SELECTOR
Press SEL button and select ST MONO or STEREO mode. When "ST"appears in the LCD
display. During the player mode, press the button to switch left speaker/right speaker/stereo.
AREA SETUP
In Radio mode' Press SEL button for several seconds, LCD will be show from AREAUSA/
EUR. At AREA USA/EUR. You can use VOL +/- to select the AREA frequency.
DISPLAY
Press DISP button (5) to operate as the conversion of each display mode as follow:
- Time is displayed for 5sec when DISP key is pressed, and it returns to its
previous display unless DISP key is pressed again.
3) From the clock mode, when DISP Key is pressed for longer than 1sec,
clock mode switches to clock Adjusting mode and the clock display
begins flashing. At this time clock or minute can be changed by pressing(+/-),
or the ENCODER VOLUME.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (6).
FLASHING LED
When ACC off ,take out the from panel from main unit that the LED (7) will be flashing.
EN
9