Maintenance; Update And Reading Out Data - Kessel Comfort PLUS Originalbetriebsanleitung

6. Maintenance

6.1

Update and reading out data

External hard drives must not be connected since the control unit
L
would not work (max. 100 mA power supply). A USB flash drive must
be formatted with FAT via a Windows PC before use and be
given a name.
When a USB flash drive is connected to the control unit, it will be recognised
automatically. Then the data transmission menu will appear with these selection
options:
• |0.1 Read out data|
• |0.2 Software update|
• |0.3 Read in parameters |
If the menu |0 System information| is displayed, the ESC key can be
used to return to the data transmission menu described above.
56
Connect USB flash drive.
Connect the USB flash drive, data transmission
(This is only possible if a respective file (*.hex)
is on the USB flash drive)
Connect the USB flash drive, data transmission
(This is only possible if a respective file (*.csv)
is on the USB flash drive)
Installation and operating manual
Read out data
Select |Read out data|
and confirm with OK. A file with the
system data is stored on the USB flash
Carry out update
Select |Software
update|,
menu appears.
confirm with OK, the update is carried out
automatically, simply follow the display
Read in parameters
Select |Read in
parameters|,
menu appears.
and confirm with OK, the update is carried
out automatically, simply follow the
drive (*.csv).
enter password and
dialogue.
enter password
display dialogue.
010-700_01