WIKA DG-10-S Betriebsanleitung Seite 5

7. Starting, operation
Function in normal mode
Key
+
+
Min/Max Memory
The min/max memory is updated with the current measured value in every measuring cycle.
The min. value is displayed by pressing the
The max. value is displayed by pressing the
Pressing and holding the appropriate key (min. or max.) and quickly pressing the menu key at
the same time resets the device to the current measured value.
Bar Graph with Trailing Pointer Function
The integrated bar graph display with trailing pointer function additionally indicated on the
display shows the trend in current working pressure directly regardless of the digital display.
With the help of the trailing pointer function, the max. stored value is also indicated in the bar
graph display in addition to the digital display in the form of a bar segment. This bar segment
is also updated to the current measure value when the min./max. value is reset.
8 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
Function / Action
 Switches the device on / off
Changes to programming mode if pressed for longer than 3 secs

Display indicated max. value as long as key is pressed
Display indicates min. value as long as key is pressed
Resets max. value to " 0 "
Resets min. value to " 0 "
-key.
-key.
GB
7. Starting, operation
Model DG-10-S
Software version
Display
Measuring range
Unit
UNIT
Storage of
settings
STORE
DG-10 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio DG-10
GB
Unit may be selected.
Factory setting "BAR".
Stores all parameter settings.
Factory setting "NO".