Sony UP-50 Gebrauchsanweisung Seite 91

6
Select the SAVE COLOR number to which new settings are to be stored by
pressing the G or g button.
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3 TEMP
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
INTERPOL. : OFF / ON
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1
Switch the desired SAVE COLOR number
to green by pressing the G or g button.
To retain the originally set value
Select a SAVE COLOR number which is different from the LOAD COLOR
number selected in step 3.
7
Press the EXEC button.
The settings are registered in the SAVE COLOR number selected in step 6.
TEMP disappears from the menu.
8
To continue settings for another LOAD COLOR number, repeat steps 3 to 7.
To finish the setting, press the MENU button.
The regular screen appears.
To copy the settings made for one LOAD COLOR number to another
LOAD COLOR number
1
Select the source LOAD COLOR number for which the settings to be copied
are stored in the COLOR ADJUST menu.
2
Select the target SAVE COLOR number to which data is to be copied.
3
Press the EXEC button.
Settings stored to the LOAD COLOR number selected in step 1 are copied to
the SAVE COLOR number selected in step 2.
To recall the LOAD COLOR number in which printout color settings
(color intensity, contrast and sharpness) are stored
Switch the desired LOAD COLOR number to green in the COLOR ADJUST
menu.
Or press the LOAD COLOR button on the sub panel. Each time you press the
button, the currently selected LOAD COLOR number is displayed for about three
seconds. To select the desired LOAD COLOR number, release the button while the
desired number is displayed.
The printout is made according to the setting of the selected LOAD COLOR
number as long as you do not modify those settings.
S A V E CO LOR :
Display the desired SAVE COLOR
S
number by pressing the G or g button.
– / 2 / – [ C ]
E X E
Installation and Adjustment
91