Sony UP-50 Gebrauchsanweisung Seite 90

Setting Up the Printer (Continued)
90
Installation and Adjustment
INTERPOL. (Interpolation)
When you want to
Print out image data such as a figure image or a glandscape.
Print out image data of computer graphics or with small letters
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
INTERPOL. : OFF / ON
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1
Switch the desired setting to green by
pressing the G or g button.
Note
Effectiveness of SHARPNESS may differ between ON and OFF settings of
INTERPOL.
To reset items to defaults (0)
Place the cursor at the adjustment item to be reset, then press the G and g
buttons simultaneously.
Once you have changed the value
Once you have changed the value, TEMP (temporary) appears on the menu
screen. TEMP indicates that the settings are temporary and have not yet been
stored. If you turn off the power of the printer while TEMP is displayed, the
adjusted values are not stored.
5
Select SAVE COLOR by pressing the F or f button.
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
INTERPOL. : OFF / ON
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1
Position the cursor at SAVE COLOR
by pressing the F or f button.
TEMP
I N T ERPO L
Display desired setting in capital
letters by pressing the G or g button.
S
TEMP
S A V E CO LOR :
Display SAVE COLOR by
S
pressing the F or f button.
Setting
ON
OFF
:
OF F / o n
1 / – / – [ C ]
E X E