Sony UP-50 Gebrauchsanweisung Seite 84

Setting Up the Printer (Continued)
84
Installation and Adjustment
2
Select SOURCE by pressing the F or f button.
OUTPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
DISPLAY : OFF / ON
RBN REMAIN: OFF / ON
SOURCE : THRU / EE
SYNC ON G : OFF / ON
MONI C –R : 0
MONI M –G : 0
MONI Y –B : 0
Q1 A 1
Position the cursor at SOURCE by
pressing the F or f button.
3
Select EE by pressing the G or g button.
OUTPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
DISPLAY : OFF / ON
RBN REMAIN: OFF / ON
SOURCE : THRU / EE
SYNC ON G : OFF / ON
MONI C –R : 0
MONI M –G : 0
MONI Y –B : 0
Q1 A 1
Switch EE to green by pressing
the G or g button.
4
Press the MENU button.
The regular screen appears.
5
Capture a new image in memory and make a printout.
Adjust the settings on the printer side by comparing the printout with the image
on the monitor, as follows.
6
Press the MENU button, then select OUT by pressing the G or g button.
The OUTPUT SETUP menu appears.
OURCE
S
Press the F or f button until SOURCE
S
appears.
S OURCE
Display EE in capital letters by pressing
S the G or g button.
:
T HRU / e e
:
t h r u / E E