Sony UP-50 Gebrauchsanweisung Seite 25

If the paper runs out during printing
3
Select PRINT QTY by pressing the F or f button.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Position the cursor at PRINT QTY by
pressing the F or fbutton.
4
Select the desired number of copies by pressing the G or g button.
When you want to
Increase the quantity.
Decrease the quantity.
5
Press the MENU button.
The regular screen appears.
Load the paper into the paper tray and press the PRINT button.
However, the printout quantity is reset to the original quantity requested when
printing is stopped.
For example, if the printout quantity is set to 5, and the paper runs out when three
copies are printed, the printout quantity is reset to 5. If you want to print only the
remaining copies, set the printout quantity to 2 after loading the paper. (See
"Loading Paper" on page 12.)
P R I NT QT Y
Press the F or f button until
S
PRINT QTY appears.
Button
g
G
:
1 [ 1 - 9 ]
25
Operation