SPORTSTECH CX625 Benutzerhandbuch Seite 62

Watt Control Program: Watt Control
Program 23 is a Speed Independent Program. Press ENTER key to set up the values of TARGET
WATT, TIME, DISTANCE and CALORIES. During the exercise mode, the level of resistance is not
adjustable. For example, the level of resistance may increase while the speed is too slow. Also the
level of resistance may decrease while the speed is too fast. As a result, the calculated value of
WATT will close to the value of TARGET WATT setup by users.
Operations:
1. Use UP or DOWN key to select the WATT CONTROL (P23) program.
2. Press ENTER key to enter your workout program.
3. The TIME will flash and you can press UP or DOWN key to set your exercise TIME. Press ENTER
key to confirm your desired TIME.
4. The DISTANCE will flash and you can press UP or DOWN key to set your target DISTANCE. Press
ENTER key to confirm your desired DISTANCE.
5. The WATT will flash and you can press UP or DOWN key to set your target WATT value. Press
ENTER key to confirm your target WATT. The default WATT value is 100.
6. The CALORIES will flash and you can press UP or DOWN key to set your exercise CALORIES.
Press ENTER key to confirm your desired CALORIES.
7. The PULSE will flash and then you can press UP or DOWN keys to set your exercise PULSE.
Press ENTER key to confirm your desired Pulse.
8. Press the START/STOP key to begin exercise.
NOTE: WATT = TORQUE (KGM) * RPM * 1.03 2.
In this program, the WATT value will keep constant value. It means that if you peddle
quickly, the resistance level will decrease and if you peddle slowly, the resistance level
will increase. Always try to keep you in the same watt value.
62