Legs Assembly And Parts - Betamotor RR 350 Bedienungsanleitung

4
• Tighten the cap to the completely ex-
tended leg.

LEGS ASSEMBLY AND PARTS

Apply the legs to the vehicle and tighten
17Nm
the screws to the torque indicated.
WARNING:
grease the screws before their application.
WARNING:
Tightening of the screws should be carried
out by adjusting the torque wrench to the
stability torque with repeated tightening
until stability torque has been achieved.
12Nm
Apply wheel and wheel bolt.
1,5Nm
Apply brake caliper, disc cover and fender.
Apply the cable gland U-bolt and tighten
the screws to the torque indicated.
Place the vehicle on the ground.
35Nm
GB
51