Replacement - Betamotor RR 350 Bedienungsanleitung

4
1
GB
2
3

REPLACEMENT

Keep the vehicle in vertical position relative
to the ground.
Replacement of the coolant must take place
when the engine is cold.
- Unscrew cap 1.
- Place a container under screw 2.
- Unscrew the screw 2.
- Drain the liquid.
- Tighten screw 2 applying the specifi c
washer.
- Unscrew drain screw 3.
- Proceed to fi lling.
- Reapply the loading cap and the bleed-
ing screw.
The amounts of liquid are shown on page
11.
Use the liquid indicated on page 14 in
the "Recommended lubricants and liquids"
table.
WARNING:
Never unscrew the fi ller cap of the radiator
when the engine is hot. Danger of burning!
40