Oil Fork; Removing Legs; Oil Replacement - Betamotor RR 350 Bedienungsanleitung

OIL FORK

The procedure for changing the oil in the
forks is provided only for information.
We recommend having the operation
performed by a BETAMOTOR authorized
workshop.

REMOVING LEGS

To replace, proceed as follows:
• Position the vehicle on the central bike
stand.
• Remove the cable gland U-bolt 1.
• Remove the brake caliper 2.
• Remove cap 3, loosen the screws 4, slide
the wheel pin out and remove the front
wheel.
• Loosen shaft lock screws 5 and take off
the slider.

OIL REPLACEMENT

• Place the legs vertically with cap 1 facing
upwards. Loosen the upper cap 1.
4
3
5
5
1
49
4
1
2
GB